The Memory Controllers Can Secure The Memory Of The PC

The computers in general are known to everybody, so rather than sticking to the other known factors or parts of the computer let us today put our efforts on something unknown parts of the computer. A discussion and introduction to the memory controller will help you further more to proceed on the computers. So let us today discuss what the memory controllers are.

The task that the memory controllers perform in a computer is of immense importance. These are a kind a chip that is placed on the motherboard or in the CPU. The function of these memory controllers is to manage the data flow which comes in and goes out from the memory. Also these are very good for increasing the potentiality and performance of the system, stores the memory very well and safely by designing to carry newer technologies in memory.

The placement of the memory controller in the computers varies based on the model of the computer. Some PCs are designed to place it in the north bridge of the motherboard while some others have it on the CPU die. Those systems, which are designed to carry the memory controller in the mother board posses a different kind of physical socket and also the RAM used in these motherboard are of new designs

The main purposes of using the memory controller in the computer are to read and write the changes in the RAM and also to refresh it. This is done by the controller by sending current. Without entering much to the technical terms, it can in fact be said that the memory controller is really essential for running and securing the RAM successfully.

The memory controllers are of different types which can be named as the Double Data Rate, the Fully Buffered and the Dual Channel. The functions of these memory controllers are more or less different from each other. For instance, the Double Data Rate memory controllers are used to transfer the data depending on the rising and falling rate of the memory clock. Whereas in the Dual- channel memory, two memory controllers are used parallel to each other. This allows the PC to build up more channels, but in spite of it there is one difficulty that because of the heap of wires used, these can not be counted. This problem leads to complexity in adding new channels.

The Fully buffered memory controllers on the other hand are different from the other memory controllers. Here a serial data link is used to connect the motherboard and not like the earlier patterns of RAM. An advantage of this type of Fully buffered memory controller is that it decreases the number of wires used in the motherboard and makes use of this expense in the time consumed for this procedure.

Author

Victor Epand is an expert consultant for computers, laptops and software. When shopping for used computers, used laptops and used software, we recommend you shop at only the best online stores for used memory controllers, used memory controllers,

No Comment | Posted in » memory controllers, ram    

How to Buy a Motherboard

by Jason

The motherboard, or mainboard, is what everything connects to. If the CPU is the brains, then this is the heart and soul of the computer. Everything - from the processor to the hard drive, and even the power supply is going to attach to it. So, purchasing the right motherboard is essential.

Here are some buying tips that will help you choose the right board for you:

* Make sure the Socket Type (or processor Interface type) matches that of your chosen CPU. Remember, the Dual and Quad Core Intel CPUs use Socket 775.
* Make sure the Front Side Bus speed matches or exceeds your processors Front Side Bus. This will vary from 500Mhz up to 1333MHz (or higher).
* Take note of the RAM type (DDR, DDR2, DDR3, Dual Channel, etc...) and its speed. Typically, you'll see Ram advertised as DDR2 Dual-Channel 800MH, just make sure the RAM you have matches your motherboards spec.
* Check how much RAM it supports! One of the most frustrating things is buying a motherboard that supports the fastest RAM, but only 2GB of it.
* Take note if it has AGP or PCI-Express (PCIe) slots. AGP is an older, outdated standard. If the motherboard you're thinking of buying doesn't have any PCIe slots, reconsider your purchase.
* If it has PCI-Express, take note of the number of "x16" slots available - if you want to set up an SLI system you'll need at least PCIe x16 slots (you'll also need to make sure the motherboard is SLI compatible).
* Does it have IDE, SATA, or both? Hard Drives generally come with a SATA connector, so you'll want to make sure your motherboard supports this. If you're getting a modern motherboard, make sure it supports SATA-II (also called SATA-300, or SATA 3.0Gb/s).
* Make note of the form factor - ATX, Mini-ATX, Micro-ATX? This will help you select a case later on, especially if you plan on making a small computer.

With these tips in hand, you'll be well on your way to building your very own computer.

About the Author
Building a computer is easy, but building a gaming computer takes research. Our Build a Gaming Computer guide has all the info you need to build your own rig from the ground up.

No Comment | Posted in » cpu, mainboard, motherboard, PCI-Express, processors, ram, SLI, socket    

Increasing Notebook Battery Power

Depending upon the model, a notebook battery usually lasts from 1 to 8 hours. However, with efficient battery usage, an hour or two of battery power can significantly be increased. You can save battery power by using the built-in battery saving modes and by following good notebook battery-saving practices.

Built-in battery-saving modes are Stand By and Hibernate. In the Stand By mode, open applications are stored in the RAM, the hard disks power down, the monitor switches off, but the processor goes on running. When you again perform some activity of the mouse or the keyboard, then the hard disk powers up, the monitor switches on, and the data from the RAM is activated, restoring your notebook exactly the way you left it.

The Hibernation mode is used when the notebook is left unattended for a long time. The open applications are stored on the hard disk, which subsequently powers down, the monitor turns off, and the processor turns off going in for hibernation. On soft rebooting like a restart or wake up on LAN, the processor turns on, the laptop wakes up, and the same exact settings are restored. Both these modes should be used to conserve battery power. You can preset your preferences in the settings of your notebook, so that in case you doze off, or leave the device for a coffee or a snack, the notebook automatically goes into any one of these power saving modes.

Following battery-saving practices can also save notebook battery power. You should always adjust the monitor controls to suit the room lighting conditions. Dimming the contrast and brightness saves battery power besides providing relief to your eyes. Auto-save and auto-update features of applications start in the background without your knowledge and these should be disabled. External devices consume a lot of battery power, hence the usage of external mice, monitors, keyboards, optical drives, videocam, digital cameras, or any other device connected to the PC Card slot, VGA/ FireWire/ USB port should be avoided.

Increase the RAM memory, if an extra slot is available, as this puts fewer burdens on the hard disk, which consumes a lot of battery power. Avoid multimedia games while you are running your notebook on battery power. Similarly, avoid music or movies. Copy the CD/DVD on the hard disk and play it from there, instead of the optical drive. Disable WiFi and Bluetooth. Built-in wireless cards should also be disabled. Decrease or set to mute the notebook speaker volume. Turn off all preprogrammed scheduled tasks. All unused open applications should be closed. The general guideline is that when your notebook is on battery power, you should perform only such operations, which are the need of the hour. Rest of the applications can be performed, when your notebook is connected to the mains.

Keeping good care of the battery also prolongs its life. To maximize performance of nickel-metal hydride batteries, they have to be completely drained off before they are recharged. However, lithium-ion batteries do not need cycling/ conditioning, and they do not suffer from memory effects. Hence, they need not be fully drained off before recharging. When the notebook is not in use for an extended period, the battery pack should be removed to avoid battery leakage. Before removing the battery pack, you should charge it fully and then remove it, as all kinds of batteries should always be stored in a fully charged state. Do not store your battery pack along with metal parts, as this will short-circuit your battery.

Utilizing the built-in battery saving options and other means, you can significantly add one to three hours more in the total capacity of your notebook battery. Sometimes, in critical situations, like an important meeting, this extra hour of notebook battery power can help you clinch your desired deal.

This article is under GNU FDL license and can be distributed without any previous authorization from the author. However the author's name and all the URLs (links) mentioned in the article and biography must be kept.

Source: Free Articles

About the Author

No Comment | Posted in » battery, Bluetooth, notebook, ram, WiFi    

3 Tips to Remember When Doing a Memory Upgrade on your Desktop

A desktop computer might be the best investment you make for your business and for your family. By providing you with the ability to create professional looking documents, access to the internet, and general gaming and music functions, you can not only broaden your world, but you can also keep up with the fast pace of information. If you've had your computer for a while, you may begin to wonder what else it can do for you and for your life. And that's where many people start when they think about adding memory.

Why You Need More Memory

Just as we all wish that we had a more efficient memory system in our brains some days, our computers wish for more memory to improve their function. RAM, or random access memory, is essential for storing programs and information when we are working on the computer, making it easier for us to access this information when we need it. The more programs we need to access, the more memory we need. As the rest of the computer is bogged down with stored programs and documents, the computer needs to rely on the RAM more and more to perform basic functions.

As this RAM depletion occurs, you might notice that your computer is running slower or having troubles with basic programs. Your computer might crash more often than it ever has or it may freeze in the middle of a task. If you didn't have a lot of memory to begin with when you bought the computer, chances are good that you still don't have a lot of memory to work with – and you need to correct this.

The good news is that you can actually do your own memory upgrade on your computer to make things move more smoothly for you. Here are three tips to help you with your first memory upgrade.

Tip #1: Always Check on How Much Memory is too Much

Just like you can't screw two light bulbs into one socket, you can't always put a lot of memory into a desktop computer. Some models simply aren't equipped to handle higher amounts of memory. But they can often be built up to about 1GB average, which is a fair amount of total memory for a basic desktop computer.

To find out how much memory your computer can handle, you can refer to your user's manual to see where the computer lists the memory capability. If you can not find it here, you might want to go to your computer manufacturer's website to see if they can give you directions from here. The help desk for your brand can also help guide you.

For a PC, you can find the maximum memory slots and capability by finding System Information through your Control Panel and finding the memory allotted. For example, if you see that the memory allotted is 1.87GB, you will know that you can only upgrade to that amount. You will then want to check to see how much memory you are using at the current time and then whatever the difference is, that's what you can add.

Adding too much memory will not work in your computer and can often cause troubles in terms of making your computer work too hard or even not work at all.

And while this seems like it would be a limiting factor in terms of your computer's performance, knowing about the memory capability will help you begin to look at computers differently when you go to buy a new one – you might want to find one that can be easily upgraded.

Tip #2: Always Buy from a Certified Memory Seller

It's very tempting to buy memory from someone that is selling it for a low price. When you want to add memory to your computer, you should expect to pay a few hundred dollars per GB that you purchase. And while this sounds like a lot of money, you will be getting a lot of performance in return.

To find certified memory sellers, you will want to go to your brand's website to see who they recommend or to simply buy the memory from the manufacturer directly. This will ensure that the memory is made for your computer and that it will work with the software and hardware you already have.

Buying from a cheaper seller can often result in malfunctioning equipment as well as a loss of the money you paid for it.

Tip#3: Always Read the Directions

Installing memory into a hard drive is actually quite simple, if you read the directions. These will come with the memory sticks themselves. Here are the basic tips:

• Buy a pair of memory sticks for maximum performance


• Turn off and unplug your desktop


• Remove all cords that supply power to your desktop


• Press in the power button to discharge any electrical charge


• Touch a metal part of the tower to discharge electricity


• Open up the tower, remove the old memory


• Push in new memory until it 'clicks'


• Put tower back together and turn on

No Comment | Posted in » efficient memory, ram    

Computer Performance - Proven Tweaks to Make Your Computer Run Faster

by Gene Higginbotham

Programs run slower than they used to.

Frequent freezes or crashes.

Sporadic system instability.

Frequent blue error screens.

Requires frequent reboots because of system hangs.

These 8 simple tweaks will help clean up your computer and you'll be surprised at the performance improvement!

CLEAN UP YOUR WINDOWS REGISTRY This essential task is often overlooked but will remarkably improve PC performance. Most PC users don't even know there is such a thing as a Registry much less that that it should be regularly cleaned. In fact, Microsoft doesn't even include a cleanup tool in Windows. Every time a program is installed or uninstalled changes are made to the Windows Registry which is a huge internal database of Windows' settings. All programs, as well as Windows itself, store a huge amount of information in this database and these entries control the way everything in the computer looks and behaves. Many times, changes to a computer are not handled correctly leading to conflicts and the slowing of the computer due to a corrupted Registry. Some things which can cause this are: * frequently installing or uninstalling programs * removing a program and leaving traces behind * leftover entries from a hardware uninstall * power failure or system crash in the midst of updating the registry * unused drivers on the system * Spyware or Adware type programs that come back every time the PC is restarted The Registry can be edited manually using a Windows program called RegEdit, but woe to the novice; this is really a job best left to the experts. Instead, you need to use a special program which makes the cleanup for you.

EMPTY THE RECYCLE BIN Regularly empty the Windows' Recycle Bin thereby releasing hard drive space and helping to improve performance. When you delete a file, instead of removing it completely from your computer, Windows puts it into the Recycle Bin. You then can restore these flies from the Recycle Bin back to their original place on your computer if you should need to.

REMOVE UNNECESSARY PROGRAMS If you're like me and download a lot of free programs or free trials, after a while your computer might begin to slow down. That means it's time to remove some of the old programs you don't use any more (and most you probably only used once just to see how they work). After installing a program, if you decide you don't need it and won't use it, get it off the computer thereby freeing up system resources. Most programs come with their own uninstaller but if it doesn't you will have to use the Operating System's Add/Remove Programs feature which you can get to through The Control Panel. Uninstalling unused programs will help speed up your computer, but removing the wrong files can cause you some really big problems. NEVER, NEVER EVER just delete a program file by using the delete key; this can really mess up the Registry. Be careful and if you are not sure, ask for help from someone you know who is more experienced. If you are unsure whether or not to remove a program, it's best to leave it. Some programs leave uninstalled junk all over the Windows Registry! Therefore, to improve PC performance AFTER AN UNINSTALL, IT'S ESSENTIAL TO CLEAN THE REGISTRY.

RUN DISK CLEAN UP Windows Disk Clean Up is a great built-in utility that automates regular maintenance tasks to improve PC performance. Whenever you "surf the net", open file attachments, delete files, etc., your computer saves a record of your activity. Most if not all of these files are harmless, and are very small. But if you spend a lot of time on your computer, before long they will use up enough space to slow your computer down a tad. Double-click My Computer, right click on the 'C:' drive, then click Properties, then click Disk Cleanup. The PC will then spend a few moments analyzing. When it has completed analyzing, Windows will give you a list of areas where it has found files to cleanup. To clean an area, check the box next to it. To leave something intact, such as Temporary files, just remove the check mark next to the item and click OK. Your computer will then begin the removal process which can take a good while.

DISK DEFRAGMENTATION When Windows stores programs and files on your hard disk it saves fragments of files in the nearest empty spaces and then links these pieces together. When the computer needs to retrieve a file, it has to go through the process of chasing these links hunting down the fragments and piecing the file back together. This can really slow down a computer, especially if it has small internal memory and has to do a lot of caching and file swapping. The cure is to routinely run the Windows Disk Defragmenter which gathers together the fragments of files and puts them back in the right order in as near contiguous space as possible. This makes it far easier for your computer to find what it's looking for on the hard drive, enabling programs and files to load more quickly. To defragment your hard disk click Start, All Programs, Accessories, System Tools and then Disk Defragment. When the program has loaded, click Defragment. Before starting you need to run "scandisk" which checks for disk errors. Without scanning your disk first for possible errors, defrag may refuse to continue its defragmentation routine. The process can take over an hour. Because defragmenting your hard disk takes such a long time, you really don't want to go through the process very often; maybe every 3-4 months and it's best not to use the computer while defragmenting.

GET A HIGH SPEED INTERNET CONNECTION If you spend a lot of time on the internet, a high speed internet connection is a must. It is more expensive, but for most people the savings in time and effort is worth the added expense. Some of the advantages to having a high speed internet connection: faster surfing, web pages open more quickly, files download faster, and if you send or receive large files, like pictures or video, they will open in a flash when compared to a slower dialup connection. If you're already spending money for your dialup connection (through your phone line) then you'll find DSL to be comparable in price, and a lot faster. A cable internet connection might cost a little more, but it is usually the fastest type of internet connection you can get from home.

REMOVE SPYWARE & ADWARE If you've ever had spyware or adware on your computer, you know how frustrating it can be. All kinds of strange things happen: your homepage changes seemingly on its own, unwanted and inappropriate popups, unfamiliar icons, and the list goes on. Spyware or Adware are files that are often downloaded onto your computer without your knowledge (or at least without you knowing what they really are). Unfortunately, many of these programs "sneak" their way onto your computer, and avoiding them entirely is difficult, especially if you spend a lot of time on your computer, surfing the Internet and downloading new programs and files. There are ways to remove these unwanted files from your computer. Check out these 2 adware/spyware removal programs that are simple to use (both are free): Ad-Aware http://www.lavasoftusa.com/support/download/ Spybot http://www.safer-networking.org/en/download/index.html Adware/Spyware continue to be such a problem because most of these programs make money for the people creating and spreading them. If you find these unwanted intruders on your computer, don't panic. In most cases, it is not vicious like a Virus or Worm. You just have some extra "junk" on your computer. However, keeping it off of your computer will help it perform more efficiently.

ADD MORE INTERNAL MEMORY (RAM) AND A LARGER HARD DRIVE If you have done all/most of the above and your Computer's performance is still so bad that you are thinking: Gee, I guess I am going to have to buy another computer! If everything else about the computer is satisfactory to you, then you might consider an Upgrade. If the PC is only a couple years old, it can easily be upgraded. If you still have the manuals that came with it, you can determine the type of memory it uses and buy it off of the internet at a good price. If you don't have the manuals, take it to Best Buy or Circuit City and ask them if it can be upgraded (or take the model and make info to them). Their upgrade cost is not that bad and certainly cheaper than buying a new computer. Another alternative: if you know a High School Kid who has taken some computer courses, he/she can probably do it real cheap. I have personally maxed out my computers memory and added another hard drive. Together with the items above, my computer runs like a "Tiger chasing a Scared Bunny". I hope this has been of help to you. I have prepared a brief video which depicts the frustration I was having with my computers performance and how I Cured My Computers Performance Problems. You can see it by clicking the link below. http://www.RegistryCleaner.factsNinfo.com

About the Author

The author has spent his entire professional work career of over 40 years in the Computer Business where he programmed or managed Computer projects for NASA, U.S. Dept of Defense and as a consultant to private industry. Click this link for a short video of how He cured his computer performance problems -- http://www.RegistryCleaner.factsNinfo.com

No Comment | Posted in » defragment, Disk Clean Up, hard drive, high speed internet, improve performance, PC users, popups, ram, Registry    

Common Causes of Slow Computers and What to Do About Them

by Steve Faber

Slow computer cause #1 - Insufficient memory (RAM). A lack of RAM will affect your computer the most when you are running multiple applications simultaneously. That's a fairly common occurrence these days. Think about how many times you run multiple apps at the same time. It's not tough. In fact, you're probably doing it now. In fact, it would be pretty difficult to run one at a time for most people.

Now that many computers ship with 1GB of memory or greater you may think that having computers slow down due to insufficient memory would be a thing of the past, but thanks to Microsoft's new Vista OS, we may actually see it continue or even increase. It looks like Vista has a prodigious appetite for RAM. For all but Vista Home Basic edition, Microsoft recommends at least 1GB, but you'd do well to double that, and bring 2GB to the party.

Slow computer cause #2 - Spyware and adware These sometimes malicious applications get on your PCs in all different ways, from legitimate applications installing them for tracking marketing data, to key loggers and other programs used to steal your passwords, account numbers, and other sensitive data. The bottom line is, the stuff is dangerous and slows down your computer. Even the stuff that's not malicious can easily be a culprit. It takes up valuable hard drive space and eats up clock cycles you could use for other things.

Slow computer cause #3 - Viruses and worms Hopefully you have a good antivirus application that's updated regularly. That will nip most virus problems in the bud, but it's still possible to get a virus. In fact, even if take all standard precautions, such as not opening unrecognized email or attachments, etc., you could still get one. If you're lucky, these malicious applications will only slow you machine down, in many cases, it will do that and much more, such as data corruption or deletion.

Slow computer cause #4 Too much stuff going on in there. You may just plain be asking too much of the old girl, or you may have to restructure your start menu so apps you don't use al the time aren't started automatically. That can not only impact your computer's speed as you're using it, but dramatically lengthen its startup time.

Slow computer cause #5 - Registry errors These are one of the most common causes of slowdowns and crashes experienced by most users. Registry problems can also make your computer take a longer time to start up. The registry is where, on a Windows machine, all the important settings and other information is stored that the computer and the applications use to run. It's actually a database that's created by the system itself.

As you constantly add and remove programs, it creates problems in the registry. When most applications are installed they put new entries in the registry that's used to run the application. One of the most common problems occurs when entries in the database called registry keys are missing or corrupted. These keys contain information that's sorted as either computer or user specific. This enables the machine to support multiple users and applications simultaneously, so it's easy to see how important the registry is. Incorrectly uninstalling an application is one of the most common ways a registry entry gets corrupted or deleted.

Thankfully it's not too difficult to find and repair Windows registry problems. There are applications available that will do it for you, or you can try to do it yourself if you're especially well versed in Windows. If take that path however, be careful, as a mistake here can really cost you.

These common causes of a slow computer are, in most cases, easily fixed, either through a little tweaking with your machine, or with a specific application designed to solve the problem.

About the Author

You'll probably never be so frustrated in your life as when your computer slows down, freezes up, or crashes. Sometimes you'll be unfortunate enough to experience all three, in that order. There are some common causes and solutions for these computer woes. You can solve your problems by checking out the fix a slow computer guide.

source:www.goarticles.com

No Comment | Posted in » computers slow down, freeze, ram, Registry errors, slow computer    

Choosing the Components to Build your Own Computer

By:IC

Many people now opt to build their own computer so that they are more in control of the specifications they want and save more than just a few pounds. There are a multitude of DIY’s found all over the Internet, and yes, it is possible to build one yourself! But before doing so, you must choose the right components for your computer. Here are some of the very basic components you need to get:

Computer Case

Computer cases now come in a variety of designs and colours. Some now even come with a panel window where you can see the inside parts through. What is important when buying a case is that the size of the case should support the size of the motherboard. A mid-tower case is highly recommended as it has enough room for all the hardware.

Power Supply

The power supply must provide you at least 300 watts and fit right into the computer case you choose. If you are one of those who extreme users or gamers, you may want to buy a bigger power supply to feed additional cooling, USB devices and case lighting.

Processor

The processor is the most important choice you need to make in setting up your own computer. You have to know exactly what kind and how fast you need. There are a variety of options from AMD and Intel, for example: AMD Athlon, AMD Sempron, AMD Duron, Intel Celeron, Intel Core Duo, among others. If you only use the computer to surf the web, do word processing, gaming and some graphics editing, the 1.8 GHz - 2.0 GHz might be enough. Extreme gaming, 3D rendering and video editing would need at least a 2.4GHz processor.

CPU Cooler

Processors usually come with a fan and a heat sink. But it is best to get a cooler that is more efficient and quieter than the one included in the package. Remember to get a thermal compound to put onto the CPU core.

Motherboard

Choose a motherboard that matches your processor's socket type and supports the same bus speed as the CPU.

RAM

Similarly, choose a RAM that is compatible with the motherboard's bus speed. Get at least 512MB of RAM.

Hard Disk Drive (HDD)

The HDD is your permanent storage for system files, applications, documents, games and so on. Get the largest hard drive capacity that you can afford. If you are on a tight budget, you can get at least a 60GB. Most motherboards have IDE slots for hard drives. Newer ones also have SATA connectors for SATA HDDs, which are quite faster than IDE HDDs.

Graphics Card
If you use the computer for regular office work, you can get a motherboard with a built-in video card. If you use it for gaming, you might want to buy a separate video card. Video cards usually use an AGP slot or a PCI Express slot on the motherboard.

Sound Card

Most motherboards have built-in sound cards which generally have good quality. If you use sound mixing or audio/video editing, you can get at least a 24-bit sound card for better quality.

CD/DVD

Of optical drives, it is best to seek for a DVD/CD-RW combo or a DVD±RW; the latter is a better choice. DVDs have larger capacity to allow you to store more music and movie files and back-up data. If you do not expect to burn disks, you can opt for a CD-R or a DVD-R drive.

JBO Solutions supply Cheap Computer Components to the UK. We also have a great range of Digital Photo Frames

No Comment | Posted in » Computer Case, dvd/cd-rwcombo, HDD, heat sink, motherboard, power supply, processor, ram, sound cards, video card    

Four Signs Your Computer Needs More Memory

By: Grant Eckert

Most computer users have had it happen to them. Their screens start to pop up with weird notifications and the state of the art system they thought they had is running at a snail's pace. The chances are very good that the only thing wrong with the computer is a shortage of memory. Before you run out and buy a bunch of memory for your system, you want to be sure that is truly the problem. There are four tell tale signs that your computer needs more memory to operate at its highest potential.

The first thing to look for is sub par or poor performance from your PC. A classic sign is when you try to open a program and it either doesn’t respond or seems to take forever to open. Memory problems can crop up quickly and the system may gradually start to act strangely or the situation may pop up all at once. Either way, a lack of memory is simple to correct and are less expensive than calling in professionals that will only tell you need more memory.

The second sign that your computer is forgetting things are the notifications that are beginning to pop up on your screen. They typically say things like low memory or out of memory. In this case, the problem is pretty obvious. The system needs more memory.

Another signal of memory issues is display problems. You pull up a page and it either only partially loads or refusing to load at all. This can happen online or in a saved document or file you are trying to work in. The problem may manifest as a blank space where the data should be or by simply not showing anything on screen at all.

In unusual cases, the PC may not operate at all. In other words, when you open anything, the system will not respond. You are left looking at your home page instead of seeing any operation progress. Once again, correcting a memory problem in your computer is easy to do and takes very little time.

When you bought your computer the chances are good that you were told it had everything you would ever need in terms of disk space, memory, and all of the possible bells and whistles. Naturally the salesperson wasn't going to tell you that memory is one of those things that simply run out. To help you understand exactly why your system is refusing to cooperate, you have to understand about the different types of memory and what your computer does with them.

Both types of memory are important to maintaining the computer in proper working condition. RAM or random access memory is the memory your computer uses first. Its operation is to run any program you call up. When RAM memory is low, the computer automatically files the information in the system's virtual memory. When the information is moved to the virtual memory, it frees up space in the RAM memory to properly run the program itself.

A low memory problem results when the computer runs out of random access memory and has to rely on virtual memory. There are programs available that take up a lot of space and can quickly deplete your computer's memory space. This type of problem can also be the result of having a program installed on your computer that you no longer need, but it hasn't freed up the memory space. You may read or hear this referred to as memory overuse or as a memory leak.

Fortunately it is a simple process to install additional memory and/or clear out unnecessary, unused programs. Both methods will help restore your computer back to its original operating speed and efficiency.

About Author: Grant Eckert is a writer for UpgradeComputerMemory.com. UpgradeComputerMemory.com is a leading provider of Ram Memory | Upgrade Memory | Computer Memory

Article Source: http://www.eArticlesOnline.com

No Comment | Posted in » memory, ram, random access memory, virtual memory