About Technology

update technology ,more fast more smart...

How To Avoid TV Repair Scams And Ripoffs

Written by oneself on 7:47 PM

By W. Braverman

In this article, we will focus on the bad business practices and outright fraud prevalent in many TV repair shops around the country. As an electronics technician with 27 years of experience, I can tell you what really goes on with your expensive electronic equipment, when you're not looking. But let me warn you. After reading this, you may be shocked, appalled, even sickened by how you may have been taken advantage of in the past. Just take comfort in the fact that you now have the information you need to next time choose a servicer that is truly a professional. OK, fasten your seat belts. Here we go.

FREE ESTIMATES Let's get to the bottom of this idea right now. Yes, it sounds like a good idea for you and the shop. But this is what really happens when you drop the unit off. Because the shop has not been paid for the time it takes to diagnose the problem, the technicians are forced to repair the easy ones first. That means that after a quick look at your set, if any real troubleshooting is required, they put it back on the shelf. Where it will sit. And sit. And sit. Now here's where it gets interesting. When the service manager or owner asks the tech the unit was assigned to (if such a system is in place) what is going on with it, He'll quickly say it's a dog. In our jargon, a "dog" is a really tough, highly technical repair that requires lots of time.

The service manager will now ask the tech to get back on it ASAP and resolve the problem so that the repair estimate can be given to the customer. By this time, at least a week has passed and the customer has not been called yet. When the customer has waited long enough and finally calls, no one knows whats going on and in some cases, has no idea even where the unit is.

Sound familiar? Has this ever happened to you? I thought so. But it gets better.

The technician will now spend a little more time on the unit. If he can't fix it now, he will appease the service manager by "stalling". In other words, he will order a part that will take a week or two to get, but will not fix the problem. This way he can put the real problem off until then.

And there you were thinking that the part you may have been required to pay a deposit on before it was ordered would fix your set. I'm afraid not. And this gambit can go on for months. This is exactly why you should always use a shop that charges a small bench charge to look at your set. This will usually go toward the cost of the repair, and covers the shops' time and materials. Typically, your job is done faster, and by a technician with a higher skill level.

SENDING A "TECHNICIAN" TO LOOK AT YOUR SET IN YOUR HOME That seems to be an everyday thing, doesn't it? But you are being deceived. In this scam, the person looking at your expensive big screen TV is NOT a trained technician. They are only there to take the back off, give it a quick once over, and then tell you it could probably be fixed for "Y" dollars or less. But he won't tell you what the problem with the unit is. Of course, he will collect a pickup and delivery fee while he's there, even though you called them because their ad said all repairs are done in the home.

Practices like this are a big problem all over the country and should give you cause for concern. Why? Because a REAL technician can tell you exactlywhat the problem is and what the cost will be to repair it. As well, it may be a small problem that can be fixed on the spot. Only an experienced service person knows the difference. Not to mention the unskilled person looking at your TV may cause unintentional damage to it. Think it doesn't happen? I've seen far too many broken picture tubes and broken boards caused by people touching something they shouldn't have or tugging on wires or parts trying to look like he knows what he's doing when the customer is looking over his shoulder.

So make sure the shop is sending you a skilled professional and not a poser. At the end of the day, this is the much better program for everyone.

USING "GENERIC" PARTS TO FIX YOUR UNIT, WHILE TELLING YOU THEY ONLY USE FACTORY ORIGINAL PARTS This is a huge problem. In my opinion, it is outright fraud. Because of the high level of sophistication of modern electronic product, factory original parts are a must. In high quality products like Sony and Panasonic, If the shop uses anything else the unit will fail and have to be serviced again at their cost. If your just repaired unit failed again after about a week, this is probably what happened. And a word of warning here. If audio or video equipment is involved that uses expensive software, be especially careful about the shop you choose. Equipment re-failure could mean irreparable damage to discs, video tapes, or expensive speaker systems.

Accept no substitutes or excuses! Make em' fix it right the first time and have them bring you the old parts.

STEALING YOUR GOOD PARTS AND REPLACING THEM WITH THEIR BAD ONES, CLAIMING THAT YOUR UNIT IS "NOT WORTH REPAIR." This is so they can fix the dogs that are hanging around in the shop at no cost. As well, this phrase is also used to save face because the technicians employed there are not skilled enough to fix your unit, but enough of it works to repair something else they have. The theft can be anything from individual parts all the way up to entire boards and sub-assemblies. Happens all the time. The only way to fight this problem is to get your unit back in the same condition (this means with the same problem) that it had when you gave it to them. Not much else you can do otherwise.

INTENTIONALLY DAMAGING YOUR UNIT Many unscrupulous shops will damage your unit to the point of making it un-reparable if you refuse their estimate. The reason is that they don't want you to take it to another shop and have it fixed AFTER they have told you what the problem is.

This is a despicable practice and is a huge problem in places like Florida. This type of shop will even remove the labels showing the model and serial numbers (this should be illegal) or cover them with tape so that when the tape is removed, the label is unreadable. This is wrong because many models of TV's, VCR's, and other products look almost just alike, and without the model numbers the unit cannot be properly repaired. You may as well just throw it away.

Again, the only defense is to make sure you get it back exactly the way you gave it to them.

GOUGING CUSTOMERS WITH OUTRAGEOUS PRICES ON VERY SIMPLE REPAIRS This is another big problem. What can I say? This type of business owner will play on the fears of someone that has no knowledge of anything electronic and take advantage of them. To be sure, charging someone $85 to replace a old fuse that simply gave up is just plain wrong. But unfortunately it happens. Sometimes you will see shops like this exposed on one of those "Caught On Tape" TV shows. I say that's too bad for them. Fortunately, there's no way back from that kind of publicity once it happens. Just make sure YOU stay away from them once they have been caught.

ADDITIONAL TIPS
Here are a few additional ideas you need to know to keep from getting scammed. Keep these tips in mind:

1.Go in to the shop and take a look around. Is it littered with wrecked TV's and other types of products? Is it dirty and disorganized? Clearly, don't leave your expensive plasma TV in such a place.

2.Make sure you drive by the place on a regular basis and make sure it's open. Why should you do this? Because if the place is locked up tight when it should be open, say around 10 in the morning, you are most likely involved with a shop that is struggling to pay it's bills. This owner obviously has more important things to do than concentrate on repairing customer product.

3.Do they have the required equipment to properly repair your unit? Take a look around and see for yourself. Modern electronics are extremely complicated, sophisticated devices. The failures that they have can be so subtle, that it takes highly advanced equipment and techniques to resolve the problem. If they don't have the proper tools, your set may be the next one sitting in the junk pile. Don't risk it. Do yourself a big favor and take the set somewhere else.

With this information in hand, You should be able to choose a high quality, reputable shop for your electronic service needs. I hope this report was helpful to you in your quest for quality repairs. Wishing you the best of luck, take care and be careful out there!

By W. L. Braverman

DO YOU HAVE A TV WITH BIG PROBLEMS?
Ugly picture? Bad or no sound? Dead? Need it fixed FAST but don't want to pay an arm and a leg? Can't or don't want to move it? We fix them IN HOME 6 days a week, rain or shine. Big Screens too!

Article Source: http://EzineArticles.com/?expert=W._Braverman

Read More......

Plasma TV vs. LCD TV - Which is Better?

Written by oneself on 5:30 AM

By: Brian Stevens

Plasma TV vs. LCD TV

You know you want to buy a flat-screen TV but you don't know if a plasma TV or an LCD TV would be your best choice.

This article explains the differences between plasma versus LCD TVs, then shows you how to get the best price for a plasma or LCD TV.

Plasma TV

A plasma TV screen consists of millions of multi-colored gas-filled cells. When electricity passes through the cells they light up and produce a picture.

Plasma TV screens have a much higher resolution than tube TV screens. In fact, the picture is so clear it's almost like watching a scene through a window.

Screen sizes range from 42" to 65" wide and are 3" to 4" thick.

LCD TV

LCD (light crystal display) TV screens are made up of a thin layer of liquid crystals sandwiched between two glass plates. When an electricity is sent through the crystals an array of tiny multi-colored pixels light up to create a picture.

LCD TV screens are thinner and lighter than plasma screens. They are the most screens for computers, and are quickly gaining popularity as TV screens.

LCD TV screens are anywhere from 1/4" to 4" thick and 2" to 65" wide.

Plasma vs. LCD Features

Picture Quality

When it comes to which type of TV screen is sharper and shows more detail, plasma TVs have a slight edge over LCD TVs, though LCD TVs are catching up.

Plasma TVs are also slightly better when it comes to viewing angle - how far you can sit to one side of a TV screen before picture quality is affected.

Screen Life

Screen life is the number of hours a TV provides before the picture begins to fade. Plasma TVs have a screen life of about 30,000 to 60,00 hours, depending on the make and model, while LCD TV's have a screen life of 60,000 hours or more.

Plasma TVs are also subject to "burn in." This occurs when a TV displays a still image long enough for a ghost of that image to be burned into the screen. LCD TVs do not have this problem.

HD TV

Both plasma and LCD TVs display HD (high definition) signals for a sharper, more three dimensional picture. LCD TVs, however, have a slightly higher resolution (more screen pixels) then plasma TVs.

Video Games

Plasma and LCD TVs are both great for video gaming, however because of plasma TV's tendency toward screen burn in, an LCD TV is the better choice if you play a lot of video games.

Portability

LCD TVs are thinner and lighter than plasma TVs, making them easier to move and easier to mount on a wall.

Plasma vs LCD TV prices

When it comes to which type of TV gives you the most bang for the buck, it depends on what you're looking for.

If you're looking for a large-screen TV - 42" or larger - plasma TVs are currently cheaper than than similar-sized LCD TVs. When I recently compared prices on 42" TVs, the cheapest plasma TV was $999, while the cheapest LCD TV was $1,367.

When it comes to mid-size TVs, I couldn't find plasma TVs smaller than 42." The cheapest 32" LCD TV I found was $619, while the cheapest 27" LCD TV was $550.

Visit the http://TheSatelliteTVGuide.com to get more information, to compare prices, and to get consumer ratings for plasma TVs and LCD Tvs.

The author, Brian Stevens, is the senior editor for TheSatelliteTVGuide.com and has written extensively on plasma TV vs. LCD TV.

Article Source: http://www.eArticlesOnline.com

Read More......

10 Bone-Headed Mistakes Plasma TV Shoppers Must Avoid!

Written by oneself on 5:34 AM


by Isaac Ridley

Shopping for a Big Screen TV means avoiding lots of people trying to dazzle you with new technology.

You have to side-step slick TV salesmen talking about "DLP", "EDTV" or "1080i". You have to outsmart internet con artists selling "gray market" Plasmas. And you have to ignore bone-headed advice from Fred, the neighborhood know-it-all.

Mistake #1: Don't Buy A "No-Name" Plasma TV! The most important decision you can make when buying a big screen TV is to decide not to buy a "No-Name". A device as complex as a LCD, Plasma or DLP TV must be manufactured with the finest components by dozens of expert technicians working in multi-million dollar plants. "No-name" companies use none of those.

Mistake #2: Never Trust A "Seeing Eye" TV Salesman! If you walk into a TV showroom and don't know EDTV from HDTV, some slick salesman will smile and eat you for lunch! Don't let salesmen make choices for you, or you'll end up with some outdated TV his boss wants to get rid of. Or you'll end up with screen burn-in on your new Plasma when your son hooks up his Playstation 3; or suffer with a dim display in your brightly lit living room. Do a little research before you make a purchase; it's not difficult.

(If you're not familiar with some of the terms used above - DLP, EDTV, LCD - Google the "123 Guide To Plasma TV.com")

Mistake #3: Don't Buy From A "No-Name" Retailer! It's important to buy your Plasma TV from a reputable dealer selling brand name merchandise. The return of a faulty $2000 Plasma TV won't bankrupt Wal-Mart or Sony; but could devastate a Mom and Pop electronics store. Try to make major purchases from a major retailer's website; make sure they offer a good return policy and have brand name Plasmas at a discount price.

Mistake #4: Don't Fall For Plasma Internet Scams! We've all seen what look like great deals on Plasma TVs online. But exactly what is a great deal? It means getting GREAT MERCHANDISE at a GREAT PRICE. It's not a great deal if you get CRAPPY MERCHANDISE at a GREAT PRICE! You don't want your "new" Plasma to be a returned or refurbished item. Avoid "gray market" or "B stock" merchandise, and avoid sellers who aren't authorized retailers.

Mistake #5: Don't Play Video Games On A Plasma Television! The chance of screen burn-in on a Plasma TV has been greatly reduced by improved technology, but not eliminated. Computer programs, video games, stock tickers and station logos can burn permanently into the screen, ruining your expensive TV. LCD and DLP TV screens cannot suffer screen burn-in, ever.

Mistake #6: Don't Let A Know-It-All Pick Your TV! Your neighbor Fred says he's an expert on Big Screen TVs, and volunteers to help you buy one. Fred may be a good guy. . . he may even know the difference between DTV and DLP. But Fred may also be a Boob blowing smoke out the rear of his shorts. How can you tell? Rely on the only person you can trust to look out for your interests . . . you! Listen to Fred, but take him with a grain of salt . . . and do your own research!

Mistake #7: Don't Try To Bring Home A Plasma TV By Yourself! There was a time you could go to Circuit City, buy a 19-inch color TV, throw it in the back seat and take it home . . . those days are over! Shipping a Plasma TV to your home is the only sensible way to get it there; it's too big, expensive, heavy and delicate to be shoved in the trunk of a car. Your retailer will arrange shipping for you; make sure that insurance and order tracking are included in the deal. Don't sign for delivery until you've inspected your TV for damage.

Mistake #8: Don't Install A Plasma TV Without Help! A Plasma TV, although thin, is actually very heavy. A 50-inch Plasma TV can weigh over 160 pounds. Mounting a Plasma TV on it's table stand is a three person job; call some strong friends over. The delivery people will put your TV on the curb, or in your living room, depending on what you paid for. They won't install your TV on a wall mount, that service costs $200-$300.

Mistake #9: Don't Fail To Connect A Dolby Sound System! You shouldn't settle for the sound coming from your TV speakers. Attached to your TV, a Dolby 5.1 Surround Sound amplifier sends six separate channels of sound through speakers in front of, on both sides of and behind the viewer. Home Theater Systems start as low as $250 and go into the thousands; they include an amplifier, five speakers, wire and a sub woofer. Dolby 7.1 is even more advanced with eight sound channels.

Mistake #10: Don't Forget To Budget For Peripherals! For full enjoyment of your new Plasma TV, you'll need lots of other stuff: HDMI cables for each peripheral, surge protectors, a TV stand or wall mount, a HDTV DVD player and digital cable for High Def broadcasts. You'll also need a Home Theater System with at least Dolby 5.1 Surround Sound and a comfortable viewing area. I'm not trying to scare you . . . a modest system can cost less than $300, A good system between $800-$1000 and a Top-of-the-Line system $1500 and up.

Well, there you have it . . . the 10 Biggest Bone-Headed Mistakes you could make when shopping for the perfect Plasma TV! Avoid them like the plague!

Good luck . . . I hope you find the Plasma TV that will thrill your family for years to come!

It's as easy as 123!

About the Author

Ike Ridley is the avid videophile and self-confessed "Movie Nut" who created the website the 123 Guide To Plasma TV . To visit us, click the links or paste this URL into your web browser:

http://www.123-guide-to-plasma-tv.com/

Ike has moved to the Caribbean where he clicks away on his laptop under a palm tree.

Read More......